Bottle and Tube Labels
GA International Cryogenic Laser Labels for Frozen Vials and Containers 0.94" x 0.5" / 23.9mm x 12.7mm Rectangle Red From -196°C to +100°C (-321°F to +212°F)
These cryogenic labels are designed to be applied directly, and will rapidly adhere, to frozen cryo vials, tubes, cryo boxes, as well as plastic and cardboard freezer boxes, which are difficult to label under deep-freeze conditions (as low as -80°C/-112°F). Designed for long-term preservation in liquid nitrogen (-196°C/-321°F), -80°C (-112°F) freezers, for dry ice transportation, and can withstand temperatures up to +100°C (+212°F)*.Printable with all common brands of laser printers to obtain a sharp, smudge-proof printout that is also resistant to mild laboratory chemicals (spray and swab). They can be applied on frozen vials and tubes without the need of an overlap and can also be written on with our Cryo-Markers.*These labels have been tested to withstand up to 2 hours of 150°C/302°F dry heat. Some softening of the adhesive is observed, which is restored when the label is returned to ambient conditions.
GA International Cryogenic Barcode Labels for Liquid Nitrogen Storage 0.75" x 0.2" / 19.1mm x 5.1mm Rectangle White From -196°C to +110°C (-321°F to +230°F)
NitroTAG labels are available in a range of sizes and configurations, perfect for identifying small-diameter cryo vials, microtubes and tube tops, cardboard or polypropylene cryo/freezer boxes, cell culture plates, and plastic bags.These thermal-transfer cryogenic labels have a strong permanent adhesive that will remain firmly and permanently attached in ultra-low temperatures. They are designed for long-term cryo-preservation under cryogenic laboratory conditions, including in liquid and vapor phase liquid nitrogen (-196°C/-321°F), freezers (-80°C/-112°F), and dry ice transportation.NitroTAG labels require zero cure time and can be immersed in liquid nitrogen immediately after application without the need for additional tape or lamination. Additionally, these labels are waterproof, weatherproof, and durable. NitroTAG labels will adhere to wet surfaces, resist multiple freeze-thaw cycles, and can withstand elevated temperatures up to +110°C.They are also resistant to spraying wi
GA International Permanent Deep-Freeze Labels for Thermal-Transfer Barcode Printers 1.5" x 1.5" / 38.1mm x 38.1mm Rectangle White From -80°C to +110°C (-112°F to +230°F)
Deep-freeze, permanent barcode labels for small diameter vials, microtubes, falcon tubes, cell culture plates, microplates, as well as polypropylene and cardboard freezer boxes. The freezer-grade labels are waterproof and tearproof, can adhere to moist and wet surfaces, and will permanently adhere to containers in (-20°C, -40°C, -80°C) freezers and dry ice without the need for extra lamination. Available in multiple configurations and colors, they are made of a durable thermoplastic film and will resist spraying with alcohols, bleach, detergents, surface cleaning wipes, and other chemicals.
GA International Cryogenic Labels (Writable) 0.44" / 11.2mm Circle Red From -196°C to +110°C (-321°F to +230°F)
These small diameter round cryo labels for microtube tops are made with a strong adhesive ideal for liquid nitrogen storage (Subject to prior verification of compatibility of labels and intended vial cap material in Liquid Nitrogen), -80°C freezers and dry ice. Specially designed to comfortably fit cryovials and Eppendorf tube caps. These waterproof deep-freeze dot labels are supplied in roll format and are available in 15 individual colors as well as packs of 15 assorted colors for color-coding and rapid identification.
GA International Cryogenic Laser Labels for Frozen Vials and Containers 1.28" x 0.5" / 32.5mm x 12.7mm Rectangle Blue From -196°C to +100°C (-321°F to +212°F)
These cryogenic labels are designed to be applied directly, and will rapidly adhere, to frozen cryo vials, tubes, cryo boxes, as well as plastic and cardboard freezer boxes, which are difficult to label under deep-freeze conditions (as low as -80°C/-112°F). Designed for long-term preservation in liquid nitrogen (-196°C/-321°F), -80°C (-112°F) freezers, for dry ice transportation, and can withstand temperatures up to +100°C (+212°F)*.Printable with all common brands of laser printers to obtain a sharp, smudge-proof printout that is also resistant to mild laboratory chemicals (spray and swab). They can be applied on frozen vials and tubes without the need of an overlap and can also be written on with our Cryo-Markers.*These labels have been tested to withstand up to 2 hours of 150°C/302°F dry heat. Some softening of the adhesive is observed, which is restored when the label is returned to ambient conditions.
Electron Microscopy Sciences CryoSTUCK™ Thermal 7/8 x 2", on 1" core
These cryogenic labels have a clear overlap area and can be applied directly to frozen tubes and cryovials, even those difficult to label in deep-freeze conditions.
Frozen vials can be labeled seconds after removal from cryogenic storage and can be placed back into liquid nitrogen or a freezer for further conservation.
Designed for long-term preservation in liquid nitrogen freezers and dry ice, they can withstand temperatures up to +100 deg C and the extra permanent adhesive allows for application to frozen containers and at temperatures as low as -80 deg C. Temperature range is from -196°C to +100°C.
The labels are compatible with most brands of thermal transfer printers. For proper adherence to the frozen surface, we recommend applying the CryoSTUCK labels with an overlap of the transparent part of at least 0.25".
Size: 0.875 x 2"
Color: White
Core: 1"
Labels across: 1
Perforated: Yes
Andwin Scientific 38X19mm Laser Tough-Tags Labels, White, 1500 pack
For general purposes, the 38X19mm Laser Tough-Tags Labels can withstand temperatures ranging from -40-121 deg.C. These are stay-flat labels for easy laser printing that comes in color White in a pack of 1500.
Electron Microscopy Sciences DT Cryo-Tag Labels 3/8" dia, Red, 0.5 mL tubes
Direct thermal printer labela are temp resistant from -196 degree C to 70 degree C and freezable in liquid nitrogen and vapor phase nitrogen. Tough – They adhere to most plastics, glass and metals without cracking, peeling or degrading. Also resistant to scuffing and smearing. Tubes labeled with Direct Thermal CryoTags easily slide in and out of centrifuge rotors without binding. Labels accept printing from direct thermal printers such as Dymo LabelWriters.
Color: Red
Use: 0.5 mL tubes
GA International Cryogenic Barcode Labels for Liquid Nitrogen Storage 0.75" x 0.75" / 19.1mm x 19.1mm Rectangle White From -196°C to +110°C (-321°F to +230°F)
NitroTAG labels are available in a range of sizes and configurations, perfect for identifying small-diameter cryo vials, microtubes and tube tops, cardboard or polypropylene cryo/freezer boxes, cell culture plates, and plastic bags.These thermal-transfer cryogenic labels have a strong permanent adhesive that will remain firmly and permanently attached in ultra-low temperatures. They are designed for long-term cryo-preservation under cryogenic laboratory conditions, including in liquid and vapor phase liquid nitrogen (-196°C/-321°F), freezers (-80°C/-112°F), and dry ice transportation.NitroTAG labels require zero cure time and can be immersed in liquid nitrogen immediately after application without the need for additional tape or lamination. Additionally, these labels are waterproof, weatherproof, and durable. NitroTAG labels will adhere to wet surfaces, resist multiple freeze-thaw cycles, and can withstand elevated temperatures up to +110°C.They are also resistant to spraying wi
Electron Microscopy Sciences Cryo-CoverTAG™ Label Rectangle, 7/8" x 1.375 with Wrap 0.75", White on 3" core
These labels have a permanent adhesive for frozen surfaces and are ideal for relabeling frozen vials when removing the existing label is not possible. They will completely obscure the existing label and "black-out" the information underneath. The relabeled frozen vials can be stored back inside liquid nitrogen or a freezer for long-term preservation.
Labels are compatible with most brands of thermal transfer printers. For proper adherence to the frozen surface, we recommend applying the Cryo-CoverTAG labels with an overlap of the transparent part of at least 0.25".
Temperature range from -196 deg C to +100 deg C.
Size: 0.875" x 1.375 + 0.75"
Color: White
Core: 3"
Labels across: 1
Perforated: Yes + notch
Electron Microscopy Sciences MetaliTAG™ Cryo Label 2 x 1", Blue on 3" core
Cryogenic thermal transfer labels for the identification of metal racks, stainless steel cryogenic racks, aluminium cassettes, X-ray film cassettes, etc. Ideal for long-term storage and bio-preservation in liquid or vapor phase liquid nitrogen and extra-low temperature freezers. Labels can be printed with most brands of thermal transfer printers. Temperature range from -196 deg C to +100 deg C.
Size: 2 x 1"
Color: Blue
Core: 3"
Labels across: 1
Perforated: Yes
GA International Xylene-Resistant Labels for Paraffin Wax Blocks 0.9375" x 0.9375" / 23.8mm x 23.8mm Rectangle White From -55°C to +70°C (-67°F to +158°F)
Thermal-transfer printable thermoplastic labels that adhere strongly to paraffin wax blocks and other hard-to-stick surfaces such as Teflon, Polytetrafluoroethylene (PTFE), Perfluoroalkoxy (PFA), Parchment paper, etc. ParafiTAG™ labels are water- and chemical-resistant, ideal for identifying paraffin wax blocks for histology applications. A chemical-resistant printout is obtained when printed with our XAR-class of solvent-resistant ribbons. The labels and printed information will resist xylene, toluene, alcohol, and other solvents and chemical exposure without additional protection.
Electron Microscopy Sciences StrawTAG™ Cryo Label 0.5 ml, 2 x 1", White on 3" core
Self-laminating cryo-compatible labels for cryogenic straws used in IVF laboratories. Designed for long-term biopreservation under cryogenic laboratory conditions, including liquid and vapor phase liquid nitrogen -196 deg C, -80 deg C freezers and dry ice transportation. Temperature range from -196 deg C to +80 deg C.
Size: 2 x 1"
Color: White
Core: 3"
Labels across: 1
Perforated: Notch
GA International Thermal-Transfer Cryogenic Labels for Frozen Vials & Surfaces 1" x 1" / 25.4mm x 25.4mm Rectangle White From -196°C to +121°C (-321°F to +250°F)
These cryogenic labels provide an all-in-one solution for cryo storage as they firmly adhere to both ambient and already frozen* surfaces (as low as -80°C/-112°F) without the need for thawing, cure time, or any other special treatment. They maintain excellent long-term adhesion when stored under cryogenic conditions. Due to their special adhesive and conformable design, these cryo labels can be applied onto both flat and curved surfaces, ideal for identifying cryo vials, microtubes, as well as cardboard and polycarbonate storage boxes destined for long-term storage in liquid nitrogen tanks (-196°C/-321°F), ultra-low temperature freezers (-80°C) and dry ice transportation. Perfectly suited for identifying vials destined for immediate immersion in liquid nitrogen as well as labeling already frozen vials without having to thaw them first, thus preserving the biological integrity of the frozen specimens.These permanent cryo labels will also resist elevated temperatures up to +121°C/+249°
GA International Cryogenic Labels for Direct Thermal Barcode Printers 4" x 1.375" / 101.6mm x 34.9mm Rectangle Mint From -196°C to +93°C (-321°F to +199°F)
These cryogenic barcode labels are specially designed for printing with direct thermal printers. The thermoplastic waterproof labels are specifically designed to permanently adhere to vials, microcentrifuge tubes, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other specimen containers that will undergo long-term cryogenic and deep-freeze storage. These labels have a strong affinity for glass, polypropylene, polyethylene, and other plastic surfaces. The cryogenic labels will remain adhered to tubes through multiple freeze-thaw cycles without cracking or peeling off. These direct thermal cryogenic labels are compatible with most cryogenic storage systems without any hindrance or risk of being scraped off. These labels do not require a self-laminate to work.